popular Vacuum Process Molding Line of sandry

Product Description

• The Vacuum Casting process begins with the creation of a master pattern using the Sterelithography process. The SLA model is then finished/painted to meet customer specified surface texture is achieved. Where the customer has supplied an existing component for casting, any part clean up is carried out at this stage.

 

•  The master pattern is then fitted with a casting gate and suspended upon the parting line in a mould casting frame

 

• Silicone rubber is mixed, de-aerated and poured under vacuum into the mould casting frame, where it will flow around the master pattern, to create a silicon mould.

 

• The mould is then cured within a heating chamber, and once set the mould is removed and cut along the parting line. The master pattern is removed before a casting funnel is placed and the mould sealed closed.

 

• Customer specified casting resin is then measured and any colour pigment mixed, where specific colour requirements have been outlined. The mould is returned to the casting chamber and the resin is pour into the mould under vacuum to avoid any air pockets or voids.

 

• When the resin has been cast, the mould is then placed in heating chamber to cure. Once cured the casting is removed from the mould, and any subsequent castings are produced (each mould can be reused with the number of castings greatly dependent on individual part complexity and casting resin selected).

 

• At this stage the gate and risers are removed from the casting and any additional finishing is carried out.

 

 

Company Information

 Qingdao Shengmei Machinery Co., Ltd, which has a dozen years of history, is specialized in vacuum process casting machines, lost foam molding machines and resin sand reclamation equipments. Having more than ten employees who is specialized in mechanical design, electrical design and foundry technology, our company has wide experience in research and development, production, installation, debugging and service. Based on good business reputation, scientific internal management, excellent product quality and service and a range of social acceptance, our company has established the dominant position in the field of vacuum process casting, lost foam molding and resin sand reclamation.